Serving the Tallahassee area  ·  (850) 404-0887  ·  Open Mon-Sun 7am-7pm
📞 (850) 404-0887 Free Quote

Metal Roofing in Chaires, FL (32317) · Local Professionals

Tallahassee Metal Roofing · Fast response in Chaires and the Tallahassee area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+200Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Chaires is the kind of place where the driveway is long, the oaks are older than the house, and the nearest neighbor might be a hay field. Most homes here sit on generous rural lots off Chaires Cross Road or Buck Lake Road, a mix of 1970s brick ranches, farmhouses, and newer builds tucked under the live oaks. Metal roofs make sense out here, and more of your neighbors are putting them up.

When a storm rolls through or a limb comes down, you want a roofer who knows the difference between a city lot and a Chaires property. We serve 32317 and the surrounding Tallahassee area, and we have worked on everything from barns and equipment sheds to custom homes. Call Tallahassee Metal Roofing at (850) 404-0887 and we will take a look.

Metal Roofing in Chaires (32317)

Chaires sits in the rolling Red Hills, and that terrain matters. A lot of properties here have grade changes, long gravel drives, and tree canopy that keeps the ground shaded and damp. We see more than a few roofs where the back slope stays wet longer, and that is where fasteners start to fail first. The soil is heavy clay in spots, so drainage around the foundation and gutters matters as much as the roof itself. And with the live oaks and longleaf pines, falling limbs are a real concern. That is one reason standing seam and corrugated panel roofs are popular here: they shed debris and handle impact better than shingles.

Our team has installed and repaired metal roofs across Chaires and the Tallahassee area, from simple ag buildings to full residential replacements. We are a Metal Roofing Alliance member, fully insured with general liability and workers' compensation, and we know how to work around the tight spots and long access runs that rural properties sometimes have.

Our services in Chaires

How a Job Works in Chaires

Step 1: You call (850) 404-0887 or request a free estimate. We schedule an on-site assessment, walk the roof and the property, and talk through what you are seeing: a leak, a storm claim, or a planned replacement. We check the decking, flashing, and fasteners, and we give you a written scope before any work starts.

Step 2: Once you approve, we pull the required roofing permit through the local building department and schedule the crew. On rural Chaires lots, we plan for material delivery and staging so we are not blocking your drive or a neighbor's field. If your home is in an HOA or a historic review area, we help you get the panel profile and color approved before we order materials.

Step 3: We clean up daily, magnet-sweep for nails, and do a final walkthrough with you. We leave your property clean and show you what we did, including any flashing or ventilation details that matter for the next storm.

Pricing in Chaires depends on the roof size, pitch, access, and condition of the decking. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof installation around $8, standing seam around $10, and metal roof replacement around $9. A retrofit over existing shingles starts around $7 per square foot, but code limits how many layers you can go over, so we verify that first. Repairs and leak repairs start around $450, screw replacement and re-fastening around $750, and flashing or chimney work around $600. Coating and painting starts around $2.50 per square foot. For a free estimate on your Chaires property, call (850) 404-0887.

✅ Metal Roofing Alliance Member, licensed and insured for work in Chaires and nearby areas.

My Chaires property has a long gravel drive and heavy oak canopy. Can you get a crew and materials back there without tearing up the yard?
Yes. We plan staging and delivery based on your access, and we use smaller equipment when the drive is narrow or the ground is soft. We also account for low limbs and power lines before we bring a truck in. On rural lots off Chaires Cross Road, that planning is part of the free estimate.
A storm just took off some panels on my barn near Buck Lake Road. How fast can you get out to Chaires?
We prioritize active leaks and storm damage. Call (850) 404-0887, and we will schedule the soonest available inspection, often same day or next day depending on volume. We can tarp or secure openings to prevent further water damage while you wait for repairs or an insurance scope.
What does a typical metal roof replacement cost for a 2,000 square foot home in Chaires?
Most 2,000 square foot homes fall in the range of $16,000 to $22,000 for a replacement, depending on pitch, decking condition, and panel type. Standing seam runs higher than corrugated. We give you a written estimate after walking the roof, and we do not add surprise charges for standard flashing or cleanup.
Do I need a permit for a metal roof in Chaires, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof in Leon County, and thresholds and inspection requirements can vary. We pull the permit and coordinate inspections as part of the job. You can check current local rules on the City of Chaires website at https://www.leoncountyfl.gov or call the building department directly.
My neighbor says my new metal roof panels overhang the property line. What should I do before installation?
Before we order materials, we review your survey and setback lines with you. If there is any question about the property line, we recommend a survey or written neighbor acknowledgment. If you are in an HOA, we also help you submit the panel profile and color for approval so there are no surprises after the roof is on.
Are you fully insured for work on my Chaires property?
Yes. We carry general liability and workers' compensation coverage. We are happy to provide a certificate of insurance before work begins so you have it for your records.
What maintenance should I do on a metal roof in Chaires to prevent leaks?
Keep the roof clear of oak leaves and pine straw, especially in valleys and behind chimneys. Check fasteners and sealant washers every few years, and have us inspect after major storms. In the Red Hills, tree debris and shade are the main culprits, so a quick seasonal check goes a long way.
Why choose us?

Trusted professionals in Tallahassee

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Tallahassee

All your work handled by qualified professionals in Tallahassee

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

200+ Verified Client Reviews in Tallahassee

⭐⭐⭐⭐⭐ 4.9/5 · 200 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Tallahassee · Response within 24h · No commitment · ☎ (850) 404-0887

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Tallahassee ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm