Licensed & Insured, in Tallahassee and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
🎁 10% off your first service · 30-day offer
Your Free Quote Request
All your work handled by qualified professionals in Tallahassee
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
Travel included · Free estimate within 24h
Tallahassee Metal Roofing is a team of local certified professionals based in Tallahassee. We respond quickly in Tallahassee and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (850) 404-0887⭐⭐⭐⭐⭐ 4.9/5 · 200 verified Google reviews
“Our old wooden barn was falling apart and we needed the roof redone before storm season. The crew came out and put on new corrugated metal panels over the whole thing in about three days. They cleaned up every last screw and scrap of metal off the ground before they left.”
Commercial & Agricultural Metal Roofing
“We added a covered porch to the front of the house and had them do a metal roof over the existing shingles so everything matched. Honestly looks better than the original roof now. Took them two days and the price was fair.”
Metal Roof Over Shingles (Retrofit)
“Had a standing seam roof put on our place out in the country, roughly 2,400 square feet. The crew of four knocked it out in under a week and the dark green finish looks sharp. Only gripe is they left a few metal shavings in the driveway that I had to sweep up myself.”
Standing Seam Metal Roofing
“Tore off the old rusted panels and replaced the whole roof on our house. What sold me was how they walked me through the flashing details around the chimney before starting. No leaks through two big rainstorms since.”
Metal Roof Replacement
“Had a leak right where the vent pipe comes through the metal roof. They got out within a couple days, resealed and replaced the flashing around the pipe, and it's been dry ever since. Relieved is an understatement.”
Metal Roof Leak Repair
“Brand new metal roof on our house and I couldn't be happier with how it turned out. They finished in five days, kept the yard tidy the whole time, and hauled off every bit of the old material. Even the gutters got matched up to the new roof.”
Metal Roof Installation
“We've got big live oaks hanging over the house and the metal roof was constantly getting dinged and leaking at the seams. They came out, replaced a bunch of screws, re-fastened loose panels, and patched a couple of puncture spots. Solid work, though scheduling took a little longer than I expected.”
Metal Roof Repair
“Called them out to inspect the metal roof after a bad wind storm knocked limbs down on it. Turned out it just needed some screws replaced and re-fastening, no real damage. They could've easily upsold me on a full replacement and didn't. Honest folks.”
Metal Roof InspectionReal photos of our work in Tallahassee · Each image shows the final result achieved for our clients
| Service | Starting from | Description |
|---|---|---|
| Metal Roof Installation | From $8/sq ft | Complete metal roof installation for Tallahassee homes built for hurricane wind and tree fall. Complete metal roof installation for homes across Tallahassee and the Big Bend, Florida Building Code-approved panel systems with high wind-uplift ratings for hurricanes, tornadoes and falling oaks, installed over sealed underlayment for a 40-60 year service life. |
| Standing Seam Metal Roofing | From $10/sq ft | Concealed-fastener standing seam systems, the premium choice for Tallahassee homes. Panels roll-formed to length and mechanically seamed; with no exposed screws; top hurricane wind-uplift ratings and a reflective finish that cuts summer heat gain. |
| Metal Roof Replacement | From $9/sq ft | Full tear-off and replacement of storm-damaged, tree-hit or worn-out roofs. Full tear-off and replacement of storm-worn shingle or end-of-life metal roofs, old roofing hauled away, decking inspected and re-nailed to code, then a complete new metal system installed. Florida insurers must offer wind-mitigation credits, ask your carrier. |
| Metal Roof Over Shingles (Retrofit) | From $7/sq ft | Retrofit metal roofing laid over the shingles already on your Tallahassee home, no tear-off. A new metal roof installed directly over your existing asphalt shingles where the Florida Building Code allows it, no tear-off, less waste, lower cost. We check deck condition and code requirements first and tell you honestly when tear-off is the better call. |
| Metal Roof Repair | From $450 | Repair for loose, limb-hit or wind-lifted metal roofing across Tallahassee and Leon County. Repair of damaged, loose or storm-hit metal roofing, replacing panels dented by falling live oak limbs, resealing seams and penetrations, and fixing failed flashing before the next downpour finds its way inside. |
| Metal Roof Leak Repair | From $450 | Leak work for metal roofs that finds the real entry point before anything is patched. Priority leak response for metal roofs, leaks traced to their true source (failed fasteners, seam separation, flashing gaps, pipe boots and skylights) and fixed right, not just caulked over. Emergency tarping available after hurricanes and storms. |
| Screw Replacement & Re-Fastening | From $750 | Fastener replacement for metal roofs loosened by hurricane wind and summer heat. Heat, humidity and storm wind crack washers and loosen screws on older exposed-fastener roofs across the Big Bend, the top cause of slow leaks on farmhouses, barns and hunting lodges. Oversized screws and new washers fix it for a fraction of the cost. |
| Corrugated & Ribbed Panel Roofing | From $5.50/sq ft | Exposed-fastener panel roofs replaced or repaired for barns, shops and rural homes. Exposed-fastener metal roofing (corrugated, R-panel and 5V), the classic North Florida farmhouse roof and the workhorse for barns, shops, carports and lodges across the Red Hills. Quality panels installed with code-rated screw patterns and closures. |
| Metal Shingle Roofing | From $9/sq ft | Metal shingles that hold up to hurricane rain, hail and falling oak limbs. Metal shingles that deliver the look of architectural shingles, slate or shake with the lifespan of steel, a favorite for Tallahassee homeowners who want hurricane-rated metal with a traditional look. |
| Stone-Coated Steel Roofing | From $9/sq ft | Stone-coated steel in tile or shake profiles, rated for wind uplift and hail. Stone-coated steel systems combining steel strength with a textured traditional finish, strong hurricane wind performance, Class A fire rating and shake or tile profiles that suit Tallahassee's brick and traditional homes. |
| Copper & Specialty Metal Roofing | From $20/sq ft | Copper and specialty metal for porches, bays and dormers on the older homes here. Copper, zinc and terne-coated roofing for bay windows, porches, dormers and full architectural roofs, premium metals that suit the historic homes of Calhoun Street, Park Avenue and Los Robles. Custom fabrication for the fine details. |
| Metal Roof Coating & Painting | From $2.50/sq ft | Coatings that bring faded, streaked metal roofs back without replacing the panels. Restoration of faded, chalking or rusted metal roofs, surface prep, rust treatment and high-performance reflective coating systems that cut summer heat gain and extend roof life 10-15 years on homes, barns and lodges. |
| Flashing, Chimney & Skylight Repair | From $600 | Chimney and skylight flashing rebuilt so driving rain stays outside. Repair and custom fabrication of flashing around chimneys, skylights, valleys and wall transitions, the number one leak point on Tallahassee roofs in tropical downpours. In-house bent flashing for a precise watertight fit. |
| Snow Guards & Ice Protection | From $1,200 | Debris and ice guards fitted where they are needed, without putting new holes in panels. Snow guards are not needed in Tallahassee, but low-profile guards and rails can still keep Spanish moss, oak limbs and storm debris from sliding off steep metal roofs over entries. Honest guidance on whether yours needs them. |
| Storm & Wind Damage Repair | Free inspection | Storm damage repair for wind-lifted, limb-hit and hail-dented metal roofs. Repair of hurricane, tornado and fallen-oak damage to metal roofing, thorough documentation with photos, honest assessment of repair vs. replacement, and help documenting your insurance claim from inspection to completed work. |
| Metal Roof Inspection | Free estimate | A straight roof inspection for buyers, sellers and owners ahead of hurricane season. Complete metal roof inspections for homeowners, buyers and insurance requirements, fastener condition, seam integrity, flashing, roof-to-wall connections and wind-mitigation details, and a straight answer on remaining service life with a written report. |
| Gutters for Metal Roofs | From $9/linear ft | Seamless gutters sized for tropical downpours, hung together with the roof. Seamless gutter systems sized and mounted correctly for metal roofing, oversized downspouts for tropical cloudbursts and guards that keep oak leaves, pine needles and Spanish moss from clogging them. |
| Commercial & Agricultural Metal Roofing | Free estimate | Metal roofing for shops, barns and commercial buildings across the Red Hills. Metal roofing for barns, plantation lodges, equipment sheds, churches and light commercial buildings across Tallahassee and the Big Bend, from Red Hills plantations and Gadsden County farms to shops in town, with durable panel systems and repairs. |
Indicative rates based on typical project size, your exact quote depends on scope, materials, and site access. Free estimate, no commitment. See full pricing guide →
Metal Roofing in Tallahassee · Response within 24h · No commitment · ☎ (850) 404-0887
Your Free Quote Request